BETTER THAN EVER: After nearly a decade of experience developing and refining our designs, sourcing the best quality raw materials, and gathering feedback from end-users on what makes the best LED bulb with the most effective beam pattern; We're proud of the new Ultra 2. This an LED bulb upgrade that is brighter. That has a better beam pattern. Lasts longer. Has more adjustability. And is easier to install. It sets an all-new standard for what products in their class bulbs should be, and we're proud to call it our own.
BRIGHTER: The Ultra Series 2 bulbs from GTR Lighting utilize the best automotive grade multi-core LED chip technology to deliver ultra-bright light, in an ultra-focused beam pattern! Not only do the elec-tec automotive-grade NLW753 chips have more lumen density than popular (but now aging) options from CREE and Philips, but there’s more to it. We have optimized the position of the LEDs so that once locked into the fog light, they are directly in-line with what the optics of the projector or reflector was designed for which will provide you, the driver the most useful and safe beam pattern. The collars have full rotational adjustability. Put simply: You’ll see a lot more, but without producing extra glare to oncoming traffic.
MORE RELIABLE: Performance aside, these are the last LED fog light bulbs you'll ever need! After many simulations, we arrived at a heat-sink design that is not only extremely effective at keeping the body of the bulb >80C, but looks cool too. Since maintaining low operating temperatures is key to LED lifespan, we’ve paired that with a bearing-less fan to actively cool the heat sink as well. The housing on our LED drivers is completely potted inside too, which is only possible with expensive-to-produce die-cast housings like the one that the Ultra 2 uses. Keeping cool and all components dry is crucial, and the Ultra 2 checks all the boxes.
BETTER FITMENT: We challenge you to find an alternative that produces the same amount of output with the same small footprint that the Ultra 2 has. Here we took a balanced approach between maximizing output and minimizing geometry so that they’ll fit in every application. Too much power and an inadequate heatsink? Premature failure. Too much power and a massive heat sink? Great, but won’t fit anywhere. Due to their superior optical focus they can create up to 10x more usable light than other LED bulb options even though they only produce 3,900 Lumen of light. If you're looking for the brightest option that’s a sure fit, you've found it.
OPTIONAL ACCESSORIES: Even though these bulbs are designed to be plug-and-play, some makes and models require additional accessories to complete the installation. Many vehicles do not need anything additional while others may need one or all of these accessories. You can try the LED bulbs without any of these accessories and add them later if needed.
ANTI-FLICKERS: If your vehicle has PWM (Pulse Width Modulation) or CanBus, you may experience flickering, shutting off, or errors on the dashboard once you install the LED bulbs. This is an easy fix, simply add our anti-flicker cancellers to prevent any issues caused by PWM or CanBus. These plug directly between the LED bulbs and your factory harness. If your headlamps have a dust cap, you will drop these inside of the housing before you install the bulbs.
BULB ADAPTERS: When you remove your stock halogen bulbs, if there is a metal or plastic adapter that locks the bulbs into place, you will most likely not be able to reuse it for the LED bulbs. However, we have a wide selection of aftermarket LED Bulb Adapters that will replace your stock model.
RUBBER DUST CAPS: If your factory housing dust cap will no longer fit your headlamp due to the rear section of the LED bulbs is too large, you will need to replace it with aftermarket LED Housing Dust Caps. You can measure the opening of your housing to select the exact size you need or select the universal model which can be trimmed down to the size you need.
Not sure if your vehicle needs accessories? The experts at Dynamic Appearance are here to help! Simply Email Us to confirm.
FEATURES:
INCLUDES:
APPLICATION: LED lights are legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in ATV, snowmobile, and off-road racing use. This usage regulation is not unique to our products. All LED lights from all brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.
