H11B Morimoto 2Stroke 4.0 LED Bulbs

BENCHMARK: While the rest of the industry has been asleep at the wheel in this category, Morimoto was hard at work developing the successor to the incredible H11B 2Stroke 3.0 LED bulbs. The 4.0 re-creates the original beam pattern from your optics effectively by doing more with less. They will put more light on the road for you as the driver, while creating less glare for oncoming traffic compared to any other LED bulb on the market today. While LED bulbs still aren't DOT approved for use in headlights in the states… foreign markets and fog light users can enjoy the best plug n play LED bulb to date. The 2Stroke 4.0. (Featuring technology patented by Morimoto)

SUPERIOR BEAM QUALITY: The advanced Aluminum Nitride Ceramic circuit board in the center of the 2S4 sets allows the bulbs to produce the most precise beam pattern possible, with its 1.45mm surface-emission interval. For reference, the tungsten filament in a halogen bulb is 1.4mm, and the previous record for an LED bulb was 2.0mm, set by the outgoing 2Stroke 3.0 bulb! Using the industry-first ceramic PCB, we have eliminated the need for the dielectric layer and a separate thermal element, which, in combination with the Osram Oslon HJL531.TE LED chips makes for unmatched performance when used in all reflector and projector-based headlights designed for halogen bulbs.

OPTIMIZED FOCAL LENGTH: Each size in the 2Stroke 4.0 lineup has been painstakingly optimized for proper output in its designated application. The critical reference distance has been calculated based on the geometry of the bulb base and the footprint of the Osram HJL531 emitter. To ensure consistency, special tools were designed to quality-control the accuracy of each bulb as it comes off the production line. Most other LED light bulbs on the market use a 'set it and forget it' reference distance across all sizes in the series, making for sub-optimal focus in most applications... not the case with the 2Stroke series of bulbs.

360 DEGREES OF ROTATION: Since no single standard exists across different headlight and fog lights, all bulbs in the 2Stroke 4.0 range are fully adjustable so that you can dial-in the position of the LED chips so that they sit perfectly at the 3 and 9-o-clock positions. On the previous gen bulbs, the gears on the base were prone to slipping when locking it into your headlight, but the new system is immune to that. In summary, setting up the alignment of your bulbs is now easier than ever!

THERMAL MANAGEMENT: The 2Stroke 4.0 uses an upgraded version of the patented system we first employed on the 3.0 bulbs. This unique cooling system uses a 12,000-rpm dual-layer fan to suck cool air into the body of the bulb and blow warm air out, back into the housing. On the intake side, cold air is sucked in past the sidewall of the PCB to exchange heat and is blown out the opposite side of the bulb. This effectively cools the bulb while warming the ambient temperature inside of the housing, increasing resistance to snow/ice buildup on the lens during the winter months. With even more static pressure than the previous version, the cooling system on the 2Stroke 4.0 maximizes longevity of the bulb, while serving up a bad-weather benefit not found elsewhere.

UNIQUE DRIVE LOGIC: The LED drivers are programmed to start up at a conservative 18W, and then ramp-up in power over the first 15 minutes before stabilizing at 22.5W. Unlike every other bulb in the aftermarket which lose output intensity over the first 15 minutes of runtime (as the system heat-soaks), the performance from the 2Stroke 4.0 remains impressive from the moment you pull out of the driveway till the moment you park the car.

LIFETIME WARRANTY: The H11B Morimoto 2Stroke 4.0 bulbs are produced using the latest OE-grade materials, electronics, and LEDs for the automotive industry. The conservative LED drive rates and highly effective thermal management systems make for low operating temperatures. All of this adds up to a bulb that is designed to last, and that’s why they are backed with an industry-leading lifetime warranty.

OPTIONAL ACCESSORIES: Even though these bulbs are designed to be plug-and-play, some makes and models require additional accessories to complete the installation. Many vehicles do not need anything additional while others may need one or all of these accessories. You can try the LED bulbs without any of these accessories and add them later if needed.

ANTI-FLICKERS: If your vehicle has PWM (Pulse Width Modulation) or CanBus, you may experience flickering, shutting off, or errors on the dashboard once you install the LED bulbs. This is an easy fix, simply add our anti-flicker cancellers to prevent any issues caused by PWM or CanBus. These plug directly between the LED bulbs and your factory harness. If your headlamps have a dust cap, you will drop these inside of the housing before you install the bulbs.

BULB ADAPTERS: When you remove your stock halogen bulbs, if there is a metal or plastic adapter that locks the bulbs into place, you will most likely not be able to reuse it for the LED bulbs. However, we have a wide selection of aftermarket LED Bulb Adapters that will replace your stock model.

RUBBER DUST CAPS: If your factory housing dust cap will no longer fit your headlamp due to the rear section of the LED bulbs is too large, you will need to replace it with aftermarket LED Housing Dust Caps. You can measure the opening of your housing to select the exact size you need or select the universal model which can be trimmed down to the size you need.

Not sure if your vehicle needs accessories? The experts at Dynamic Appearance are here to help! Simply Email Us to confirm.

FEATURES:

• Osram Oslon Black Flat S LED Chips
• 5500K Hyper White or 3000K Golden Yellow Color Temp
• 2600 Lumens Per Bulb, 5200 Lumens Total
• 50,000 Hours Lifespan
• Lifetime Warranty

INCLUDES:

• Two (2) H11 Morimoto 2Stroke 4.0 LED Bulbs
• Two (2) H11B Adapters

APPLICATION: LED lights are legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in ATV, snowmobile, and off-road racing use. This usage regulation is not unique to our products. All LED lights from all brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.