H7 DA Lighting V1 LED Bulbs

INTRO: The H7 DA Lighting V1 LED Bulbs were designed to compete with some of the best LED lights on the market while keeping the price tag low. They were built with premium components to ensure they exceed your expectations in performance and longevity. You can expect 300% more light output over your stock lights which is the equivelant of a 35w HID Kit. Unlike HID, they have a much longer lifespan of 30,000 hours which cane last up to 10 years! The best part is the low price but don't let that fool you, they will outperform many of the more expensive LED bulbs on the market.

PRECISION: Unlike HID that performs great in any housing, LED performance will vary depending on the design of the bulb, placement of the LED chips along with the housing. If you pick the wrong one like a 3-sided or 4-sided LED bulb, your beam pattern will be all over the place except on the road where it counts. The H7 DA Lighting V1 LED Bulbs utilize (6) 1860 LED chips per bulb that are properly aligned to produce a 6000K Diamond White in a beam pattern that matches the original bulb.

FITMENT: You will be surprised how many LED bulbs are too large to fit housings. This is why the H7 DA Lighting V1 LED Bulbs are designed to be as close as possible to the original halogen bulbs. Even the LED chips are mounted to a slim PCB board which eliminates the possibily of hitting anything inside the housing. This is also key in preventing any dark spots in your beam pattern.

COOLER: When it comes to LED bulbs, excessive heat is the absolute worst. When the temperature exceeds the limit of the LED chips, they will quickly fail which is why a balanced thermal management is neccessory. The H7 DA Lighting V1 LED Bulbs feature a 6063 aluminum shell wrapped around a red copper heat pipe that moves the heat down to a heat sink that dissapates the heat. Simply put, a cool bulb is a healthy bulb!

INSTALL: Our H7 DA Lighting V1 LED Bulbs are designed to be 100% plug and play with most vehicles. You will remove your stock halogen bulbs, install the LED bulbs using the same method, and plug into your factory harness.

OPTIONAL ACCESSORIES: Even though these bulbs are designed to be plug-and-play, some makes and models require additional accessories to complete the installation. Many vehicles do not need anything additional while others may need one or all of these accessories. You can try the LED bulbs without any of these accessories and add them later if needed.

ANTI-FLICKERS: If your vehicle has PWM (Pulse Width Modulation) or CanBus, you may experience flickering, shutting off, or errors on the dashboard once you install the LED bulbs. This is an easy fix, simply add our anti-flicker cancellers to prevent any issues caused by PWM or CanBus. These plug directly between the LED bulbs and your factory harness. If your headlamps have a dust cap, you will drop these inside of the housing before you install the bulbs.

BULB ADAPTERS: When you remove your stock halogen bulbs, if there is a metal or plastic adapter that locks the bulbs into place, you will most likely not be able to reuse it for the LED bulbs. However, we have a wide selection of aftermarket LED Bulb Adapters that will replace your stock model.

RUBBER DUST CAPS: If your factory housing dust cap will no longer fit your headlamp due to the rear section of the LED bulbs is too large, you will need to replace it with aftermarket LED Housing Dust Caps. You can measure the opening of your housing to select the exact size you need or select the universal model which can be trimmed down to the size you need.

Not sure if your vehicle needs accessories? The experts at Dynamic Appearance are here to help! Simply Email Us to confirm.

FEATURES:

• Automotive-Grade 1860 LED Chips
• 300% Brighter Than Stock Halogen
• Same Light Output as 35w HIDs
• 4000 Lumens (Raw) Per Bulb
• Error-Free Canbus Technology
• 30,000 Hours Average Lifespan
• 2 Year Warranty

INCLUDES:

• Two (2) H7 DA Lighting V1 LED Bulbs

APPLICATION: LED lights are legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in ATV, snowmobile, and off-road racing use. This usage regulation is not unique to our products. All LED lights from all brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.