VLEDS Micro Limited LED Bulbs

EVEN SMALLER MICRO: Introducing the Micro Limited! Using our years of experience with the Micro Evolution we have developed something even smaller in size but still capable of producing as much output as a 25W HID system. Due to its even smaller size and efficient thermal management, it can even be used in tight fitting sealed low beam headlights or fog lights!

CHOICES: The market is flooded with sub-par product and it's hard to know what to buy. The looming questions, will it fit? Is it bright enough? Is the color going to be right? The Micro Limited answers YES to all of the above! It's really the perfect lower output choice for headlights, fog lights, open reflector, projector, and especially tight fitment sealed back housings. If you have to remove a cap or cover to get to your bulb the Micro Limited is guaranteed to fit!

FITMENT: The Micro Limited is the smallest, highest output LED replacement of it's kind ensuring both a perfect fit as well as superior performance. Installation is simple with its plug and play design, and super small in-line driver. The bulb can also be indexed a full 360 degrees for perfect fitment in offset housings.

EFFICIENT: Perfect thermal management is achieved by utilizing both a copper heat pipe inside a 6063 aluminum shell. Heat dissipation is managed using an enclosed waterproof high-speed turbo fan.

COLOR TEMP: Along with their high-efficiency level, LED headlights offer significant benefits in terms of safety and comfort. Because both 5K and 6K perform exceptionally well, it ultimately comes down to personal preference. 5K is pure white (the best match to factory LED parking and DRL lights), giving a more OE factory look. 6K is white with a slight tint of blue, providing a more luxurious or high-end look. 3K is best in fog and foul weather as they reduce reflection and glare. Our 3K is referred to as Ion Yellow, it does not have any amber or orange tint to it.

OPTIONAL ACCESSORIES: Even though these bulbs are designed to be plug-and-play, some makes and models require additional accessories to complete the installation. Many vehicles do not need anything additional while others may need one or all of these accessories. You can try the LED bulbs without any of these accessories and add them later if needed.

ANTI-FLICKERS: If your vehicle has PWM (Pulse Width Modulation) or CanBus, you may experience flickering, shutting off, or errors on the dashboard once you install the LED bulbs. This is an easy fix, simply add our anti-flicker cancellers to prevent any issues caused by PWM or CanBus. These plug directly between the LED bulbs and your factory harness. If your headlamps have a dust cap, you will drop these inside of the housing before you install the bulbs.

BULB ADAPTERS: When you remove your stock halogen bulbs, if there is a metal or plastic adapter that locks the bulbs into place, you will most likely not be able to reuse it for the LED bulbs. However, we have a wide selection of aftermarket LED Bulb Adapters that will replace your stock model.

RUBBER DUST CAPS: If your factory housing dust cap will no longer fit your headlamp due to the rear section of the LED bulbs is too large, you will need to replace it with aftermarket LED Housing Dust Caps. You can measure the opening of your housing to select the exact size you need or select the universal model which can be trimmed down to the size you need.

Not sure if your vehicle needs accessories? The experts at Dynamic Appearance are here to help! Simply Email Us to confirm.

FEATURES:

• Seoul Semiconductor Y19 (ETI 3K) LED Chips
• 2500 Lumens Per Bulb, 5000 Lumens Per Pair
• 200% Brighter than Stock, Equal to 25w HID Kit
• 30,000 Hours Lifespan
• 2 Year Warranty

INCLUDES:

• Two (2) VLEDS Micro Limited LED Bulbs

APPLICATION: LED lights are legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in ATV, snowmobile, and off-road racing use. This usage regulation is not unique to our products. All LED lights from all brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.