Correct Part Always
Have a Question?
Correct Part Always
We Know Lighting
We Price Match
$40+ Free Shipping
VLEDS V50: Just released, the 9007 VLEDS V50 LED Bulbs is our newest option to upgrade your headlights. With an unoffensive 5000 lumens output, they are perfect for every application especially in the low beam projectors and high beams. Due to the increased power, an error-free external driver was added to provide better reliability and longevity.
DESIGN: The V50 utilizes HP 3570 LED chips produce a clean 5000K color temp that emulated optimal daylight driving conditions. The chrome-plated stem virtually disappears inside the housing, blending perfectly with the factory reflector. Over-molded wiring effectively isolates electrical components from the elements, leaving no base types or connections overlooked.
COOL: The HP 3570 LED chips that features higher light output while producing less heat. The dedicated thermal pad helps directly transfers the heat away from the chips to the PCB. The ultra-thin, 1.5mm copper core PCB is designed for optimal light output and a focused, crisp beam pattern. The dual square copper heat pipes provide a significant increase in contact surface area, enhancing efficiency in thermal management. Enhanced conductivity and superior thermal efficiency with a copper-plated internal heat sink. On top of this, a Whisper Flo fan is added spinning at 12000 RPM with a near-silent 55 dB operation.
ERROR-FREE: The VLEDS V50 is designed to draw the same amperage as original halogen bulbs which eliminates the need for additional anti-flickers cancellers. So we recommend trying them without anti-flickers and only adding them if you see flickering or errors on the dash.
OPTIONAL ACCESSORIES: Even though these bulbs are designed to be plug-and-play, some makes and models require additional accessories to complete the installation. Many vehicles do not need anything additional while others may need one or all of these accessories. You can try the LED bulbs without any of these accessories and add them later if needed.
ANTI-FLICKERS: If your vehicle has PWM (Pulse Width Modulation) or CanBus, you may experience flickering, shutting off, or errors on the dashboard once you install the LED bulbs. This is an easy fix, simply add our anti-flicker cancellers to prevent any issues caused by PWM or CanBus. These plug directly between the LED bulbs and your factory harness. If your headlamps have a dust cap, you will drop these inside of the housing before you install the bulbs.
BULB ADAPTERS: When you remove your stock halogen bulbs, if there is a metal or plastic adapter that locks the bulbs into place, you will most likely not be able to reuse it for the LED bulbs. However, we have a wide selection of aftermarket LED Bulb Adapters that will replace your stock model.
RUBBER DUST CAPS: If your factory housing dust cap will no longer fit your headlamp due to the rear section of the LED bulbs is too large, you will need to replace it with aftermarket LED Housing Dust Caps. You can measure the opening of your housing to select the exact size you need or select the universal model which can be trimmed down to the size you need.
Not sure if your vehicle needs accessories? The experts at Dynamic Appearance are here to help! Simply Email Us to confirm.
APPLICATION: LED lights are legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in ATV, snowmobile, and off-road racing use. This usage regulation is not unique to our products. All LED lights from all brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.