XTREME LED PRO: Step up your game with these outstanding drop-in LED bulbs. The H7 Xtreme LED Pro series is a simple, straightforward way to make a real difference in your vehicle’s attitude and safety. Every millimeter of these lights has been agonized over to ensure that you’re rocking a high-quality, durable product that will get the attention of all that see them.
THEY’RE SUPER COOL: These bulbs are seriously cool. That’s all thanks to the all-new, patented aluminum alloy leaf passive heat sink. This is a giant leap past the old-school ribbon heat sinks of the past that would crack and fail over time. It also embarrasses the LED bulbs out there with fans in them that constantly create electrical interference and can become clogged. Thanks to this new design you can be sure of two things. First, these heat sinks will continue to do their job for the entire life of the LEDs, and second, they’ll produce outstanding output their whole life since they’re so cool.
GETTING TECHY: The housing is designed for the original halogen filament. That means that there’s a perfect geometry to where you need to place the light source to get the best possible output. If you shift that source too far in one direction or another you simply won’t get the best performance. That’s why we’ve used three Lumileds ZES on each side of the light head in an undomed configuration. It matches the size of the original source almost perfectly and it is miles better than the 4-emitter arrays or domed COB emitters available on the market.
LUMENS & LIGHT OUTPUT TRUTH: The truth is that much like manufacturers measure horsepower at the crank, not at the wheels, many light builders and merchants quote lumen numbers that are taken right after the bulb is lit up in a cold chamber, not after it’s had time to operate for any real amount of time. We don’t pull those tricks on you. These pump out 1750 lumens after a full hour of running in 60C or 140F heat. That means that you’re getting real super bright white with our 5500K color temperature every day, all the time, from start to finish without worry. Don’t be fooled by a bunch of fake hype. You deserve the best.
THE DETAILS: These lights are really bespoke bits of artwork. The 25mm rigid tail of light head is considerably smaller than other LED bulbs on the market because we know many of them don’t fit properly. In addition, the light head itself is clockable. That reduced size doesn’t require us to skimp on materials though because we’ve used only the best copper circuit boards for optimal thermal conductivity. Truly, this is the top-performing LED bulb with OE-level quality and "fit it and forget it" durability and dependability.
OPTIONAL ACCESSORIES: Even though these bulbs are designed to be plug-and-play, some makes and models require additional accessories to complete the installation. Many vehicles do not need anything additional while others may need one or all of these accessories. You can try the LED bulbs without any of these accessories and add them later if needed.
ANTI-FLICKERS: If your vehicle has PWM (Pulse Width Modulation) or CanBus, you may experience flickering, shutting off, or errors on the dashboard once you install the LED bulbs. This is an easy fix, simply add our anti-flicker cancellers to prevent any issues caused by PWM or CanBus. These plug directly between the LED bulbs and your factory harness. If your headlamps have a dust cap, you will drop these inside of the housing before you install the bulbs.
BULB ADAPTERS: When you remove your stock halogen bulbs, if there is a metal or plastic adapter that locks the bulbs into place, you will most likely not be able to reuse it for the LED bulbs. However, we have a wide selection of aftermarket LED Bulb Adapters that will replace your stock model.
RUBBER DUST CAPS: If your factory housing dust cap will no longer fit your headlamp due to the rear section of the LED bulbs is too large, you will need to replace it with aftermarket LED Housing Dust Caps. You can measure the opening of your housing to select the exact size you need or select the universal model which can be trimmed down to the size you need.
Not sure if your vehicle needs accessories? The experts at Dynamic Appearance are here to help! Simply Email Us to confirm.
FEATURES:
INCLUDES:
APPLICATION: LED lights are legal in the USA for Fog Light use only. Not compliant with DOT / FMVSS108 and not street legal in the USA for Headlights. Legal for off-road use in ATV, snowmobile, and off-road racing use. This usage regulation is not unique to our products. All LED lights from all brands, regardless of marketing claims, are prohibited from street use in halogen headlights in the USA.
